Magnetic-bearing compressor
T Series
High evaporating-temperature platform
A four-model, two-stage family organised around high evaporating-temperature applications and OEM-designed refrigerant flow.
Integration context
Place the component inside the engineered system.
The diagram establishes responsibility boundaries. Exact ports, loads, dimensions, wiring and service clearances require the current model drawing.
Conceptual integration view
Refrigerant-circuit position
- OEM systemEvaporator
- Product familyT Series
- OEM systemCondenser
- OEM systemExpansion device
BMCC, drive and chiller controls are coordinated through project-defined interfaces.
Platform scope
Catalog-defined family, application-led selection.
A four-model, two-stage family organised around high evaporating-temperature applications and OEM-designed refrigerant flow.
- Documented use case
- Application-specific chiller and thermal-system integration
- Model coverage
- 4 models
- Refrigerant in supplied catalog
- R134a
- Architecture
- Integrated, two stage, single-end
- Capacity regulation
- 10–100%
- Protection field
- IP54
Published lineup
Models in this family
Scroll horizontally to review all published model fields
| Model | Rated power field (kW) | Max pressure ratio | Mass (kg) |
|---|---|---|---|
| YMC100T | 80 | 5.2 | 140 |
| YMC120T | 90 | 4.0 | 158 |
| YMC150T | 90 | 3.5 | 160 |
| YMC200T | 115 | 3.5 | 165 |
The supplied T Series table labels this field as rated power, not cooling capacity. Refrigerant flow is specified per customer design condition.
Standards context: ANSI/AHRI 550/590 (I-P) — the rating method behind chiller capacity and efficiency figures, including the integrated and non-standard part-load values (IPLV, NPLV) that part-load claims are quoted against. Enclosure and drive fields are read against IEC 60529 — the IP code behind the enclosure rating in these fields, with the tests that verify each digit. The catalog fields on this page are supplied values, not a third-party rating to that standard; project performance is confirmed in writing.
- Source ID
- CAT-202607-P07
- Document
- Supplied product catalog
- Edition / language
- 2026-07 · Chinese
- Catalog location
- Page 7
- Last transcribed review
- 2026-08-12
OEM application review
Start with your operating conditions.
Share the application, operating conditions, electrical requirements and control context for an engineering discussion around this product family.