Magnetic-bearing pump platform
Magnetic-Bearing Pumps
Bearingless centrifugal circulation
Compact centrifugal pumps with closed-loop flow control for supporting thermal-management equipment development.
Integration context
Place the component inside the engineered system.
The diagram establishes responsibility boundaries. Exact ports, loads, dimensions, wiring and service clearances require the current model drawing.
Conceptual integration view
Thermal-loop position
- OEM systemThermal load
- Product familyMagnetic-Bearing Pumps
- OEM systemHeat exchanger
- OEM systemReturn circuit
Flow target, power supply, feedback and protection remain project-defined.
Platform scope
Catalog-defined family, application-led selection.
Compact centrifugal pumps with closed-loop flow control for supporting thermal-management equipment development.
- Documented use case
- Supporting thermal-management component integration
- Model coverage
- 3 models
- Pump type
- Bearingless centrifugal
- Control context
- Closed-loop flow regulation
- Published models
- YBP600 / 1200 / 4000
Published lineup
Models in this family
Scroll horizontally to review all published model fields
| Model | Rated power (W) | Max rpm | Max flow (L/min) | Max head (bar) |
|---|---|---|---|---|
| YBP600 | 600 | 9,000 | 75 | 3.2 |
| YBP1200 | 1,200 | 8,500 | 120 | 5.2 |
| YBP4000 | 4,000 | 8,000 | 280 | 6.3 |
Standards context: IEC 60529 — the IP code that enclosure ratings on this page refer to, with the tests that verify each digit and a scope limited to electrical equipment rated up to 72.5 kV. Enclosure and drive fields are read against IEC 61800-2:2021 — rating specifications for the adjustable speed drive these machines are fed from, taken as one system with the motor. The catalog fields on this page are supplied values, not a third-party rating to that standard; project performance is confirmed in writing.
- Source ID
- CAT-202607-P11
- Document
- Supplied product catalog
- Edition / language
- 2026-07 · Chinese
- Catalog location
- Page 11
- Last transcribed review
- 2026-08-12
OEM application review
Start with your operating conditions.
Share the application, operating conditions, electrical requirements and control context for an engineering discussion around this product family.